Vanguard 522447 Automobile Parts User Manual


 
4
3
FLYWHEEL AND REAR SEAL RETAINER
2. Install flywheel, Fig. 7.
NOTE: Apply Permatex No. 2 or similar sealant
to flywheel screws.
a. Torque flywheel screws to 47.0 Nm
(35 ft. lbs.).
Remove flywheel holder.
Fig. 7 – Installing Flywheel
INSTALL OIL PAN
1. Install oil pan with new gasket, Fig. 8.
a. Apply a small bead of Permatex No. 2 or
similar sealant to crankcase areas shown.
b. Torque screws and nuts to 8.0 Nm
(70 in. lbs.).
Fig. 8 – Installing Oil Pan
SEALANT