Filter
Top Products
12
4
LUBRICATION SYSTEM
Exploded View
DISASSEMBLE GEAR CASE
Remove Oil Pump
Make sure that #1 cylinder is at TDC, compression
stroke. See Section 2.
Remove V-belt and fan (if equipped). Drain oil from
engine.
NOTE: Clean areas around fuel lines and injec-
tors to prevent dirt entry.
1. Remove the following parts, Fig. 6.
a. Glow plug wiring.
b. Glow plugs.
c. Injector pump bracket.
d. Remove fuel delivery lines.
Fig. 6 – Remove Fuel Delivery Lines
B
A
C
D