Filter
Top Products
14
9
TURBOCHARGER
11. Remove oil inlet line union screw at rear of cylinder
head. Discard washers.
Fig. 21 – Removing Union Screw
12. Remove oil inlet line bracket screw at the exhaust
manifold.
Fig. 22 – Removing Bracket Bolt
13. Remove two screws from turbocharger and pull
out the oil outlet tube from the cylinder block.
Discard “O” ring and gasket.
Fig. 23 – Removing Oil Outlet Tube
14. Remove screws (2) and nuts (3) and remove
turbocharger mounting bracket. Discard gasket.
Fig. 24 – Removing Turbo Charger Bracket