Filter
Top Products
13
5
COOLING SYSTEM
Installing Water Pump
1. Install water pump with new gasket, Fig. 10.
a. Torque screws and nuts to 19.0 Nm (170 in.
lbs.).
After installing water pump make sure pump rotates
smoothly.
Fig. 10 – Installing Water Pump
2. Install coolant inlet with new gasket, Fig. 11.
a. Torque screws to 8.0 Nm (70 in. lbs.).
3. Install thermostat and coolant outlet with new
gasket, Fig. 11.
a. Torque screws to 8.0 Nm (70 in. lbs.).
4. Install temperature gauge wire (if equipped).
5. Install radiator hoses.
Fig. 11 – Installing Coolant Inlet And Outlet
6. Install fan (if equipped) and water pump pulley,
Fig. 12.
a. Torque screws to 8.0 Nm (70 in. lbs.).
Fig. 12 – Installing Fan And Pulley
7. Install V-belt, Fig. 13.
a. Belt tension adjustment: 10-12 mm/10 kg
(3/8-1/2 in./22 lbs.).
8. Refill cooling system.
3/8 – 1/2 Inch
(10 – 12 mm)
BELT MOVEMENT
HANDLE
BELT
A
B
Fig. 13 – Install V-Belt