Filter
Top Products
Workman MDEPage 5 -- 2Chassis
Specifications
Item Description
Front tire (22 x 9.5 -- 10, 4 ply) pressure 8 to 22 PSI (55 to 152 kPa)
Rear tire (22 x 9.5 -- 10, 4 ply) pressure 8 to 22 PSI (55 to 152 kPa)
Wheel lug nut torque (front and rear) 45to65ft--lb(61to88N--m)
Brake Fluid DOT 3
Special Tools
Order special tools from your Toro Distributor.
Spanner Wrench
Use spanner wrench to rotate front shock absorber col-
larwhich changesthe lengthof theshock springto affect
front wheel camber. Make sure that vehicle is jacked up
off the ground to allow shock spring to be at full exten-
sion before using spanner wrench.
Toro Part Number: TOR6010
Figure 1
Shock Spring Compressor
Use shock spring compressor to remove spring from
front shock absorber.
Toro Part Number: TOR6015
Figure 2
Rev. A