Filter
Top Products
Workman MDE Page 5 -- 25 Chassis
Removal (Fig. 19)
1. Park machine on a level surface, stop engine, set
parking brake and remove key from the ignition switch.
2. Disassemble cargo box as necessary using Figures
19 and 20 as guides.
Installation (Fig. 19)
1. Assemble cargo boxusing Figures 19and 20 asgui-
des.
A. When installing cargo box, use torque specifica-
tions identified in Figure 19.
B. Adjust latch pin (item 13 in Figure 19) so that car-
go box is tight to frame when latched.
1. Cargo box
2. Inner tailgate
3. Outer tailgate
4. RH latch rod
5. Latch handle
6. Screw (24 used)
7. LH latch rod
8. Retainer (2 used)
9. Striker mount (2 used)
10. Strike latch (2 used)
11. Screw (4 used)
12. Screw (4 used)
Figure 20
2
3
6
8
9
10
11
1
5
7
12
4
6
6
Chassis
Rev. A