Filter
Top Products
Workman MDE
Page 3 -- 21
Electrical System
6. Replace contactor if necessary.
7. Connect electrical connections to contactor. If main
contactor connections were removed, use Figure 33 as
a guide for reattaching cable and wire harness connec-
tions.
8. Connect battery cable that was removed from bat-
tery pack.
1. Main contactor
2. Cable to controller B+
3. Lock nut
4. Flat washer
5. Wire harness connector
6. Fuse (F1)
7. Positive battery cable
8. Isolator
Figure 33
1
2
3
4
5
6
3
7
8
4
45 to 50 in--lb
(5.1 to 5.6 N--m)
Electrical
System