Filter
Top Products
Workman MDE Page 5 -- 23 Chassis
Removal (Fig. 18)
1. Park vehicle on a level surface, turn on/off switch
OFF, set parking brake and remove key from the on/off
switch.
2. Remove two (2) flange head screws (item 21) that
secure RH and LH pivot brackets (items 20 and 30) to
the rear frame.
3. Release latch rod (item 33) from the latch pins (item
26). R emove cargo box from the frame. Disassemble
cargo box as necessary using Figure 18 as a guide.
Installation (Fig. 18)
1. Assemble cargo box using Figure 18 as a guide.
2. Position cargo box to the frame locking the latch rod
(item 33) to the latch pins (item 26).
3. Secure both pivot brackets (items 20 and 30) to the
rear frame with flange head screws (item 21).
Chassis
Rev. A