Filter
Top Products
Chapter 2: Basic Checkout
SCU Tabs
26 Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual
To configure encryption:
• Tap on the Encryption dropdown menu, and choose the appropriate type of
encryption – Manual WEP, Auto WEP, WPA PSK, WPA TKIP,
WPA2 PSK, WPA2 AES, and CCKM TKIP.
If you choose Manual WEP, WPA PSK or WPA2 PSK:
• Tap on the WEP/PSK Keys button. For Manual WEP, choose up to four
static WEP keys. For PSK, type an ASCII passphrase or hex PSK.
• Configure any other settings that are supplied by the network administrator
for the SSID to which you will associate.
• Make certain that you tap on Commit following each change.
Once you’ve completed the configuration:
• Tap the Main tab. Tap on the Active Config button – your new config will
be listed in the dropdown menu.
When you tap on the config you created, the Summit DC-802.11_SC_CF (Model
#RA2041) radio module attempts to connect to the network using these steps:
- Associate to the SSID.
- Authenticate to the network.
- If EAP authentication is being used, derive dynamic encryption keys.
- If DHCP is being used by the network, obtain an IP address.
If the Summit DC-802.11_SC_CF (Model #RA2041) is not connecting:
• Tap on the Status tab.
The Status dialog box lists the IP and MAC address, and indicates the cur-
rent state of the radio, the signal strength, channel and so on.
You can also use the Status screen for DHCP renewal and ICMP Echo
Requests (Pings).
Important: For details about the Status dialog box, refer to “Status Tab” on
page 35.
2.10 SCU Tabs
This section provides a detailed description of each of the tabs available in the SCU
– Main, Config, Status, Diags and Global Settings.