Filter
Top Products
Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual 145
Chapter 5: Configuration
Scanner Properties Setup
Suffix Char
This character, if non-zero, is added after a successfully decoded bar code. Choosing
this option displays a window in which you can assign a character. When this
window is displayed, press the key you want to insert. The ASCII/Unicode key
value of the keypress is displayed.
Pressing the [ESC] key in this dialog box resets the data to zero.
Strip Leading
This parameter determines the number of characters that will be removed from the
beginning of the bar code before the prefix character is added. Choosing this option
displays a window in which you can assign a value.
Note: The appended character is treated as any other keyboard character. For
example, if [BKSP] is pressed, the usual action for that key is performed.
If your 8525 G2/8530 G2 is operating with the Psion Teklogix ANSI emu-
lation application, the vehicle-mount transmits the escape sequence asso-
ciated with the function immediately after the bar code data.
Strip Trailing
The value entered in this parameter determines the number of characters that will be
removed from the end of the bar code before the suffix character is added.
5.5.13.8 EAN 8
Enabled
Set this parameter to on to enable EAN 8 or off to disable it.
Include Check
If this parameter is enabled (set to on), the check digit is included with the decoded
bar code data.