Filter
Top Products
Chapter 5: Configuration
Narrow Band Radio Setup
106 Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual
5.5.8 Narrow Band Radio Setup
Note: Keep in mind that the Narrow Band icon is only visible in the Control
Panel when a Narrow Band radio is installed in the unit.
•In the Control Panel, choose the Narrow Band Radio icon.
Figure 5.9 Narrow Band Icon
5.5.8.1 Info Tab
In the Narrow Band Radio dialog box, the Info tab displays information about the
radio – it cannot be edited.
The Power information in this screen indicates the power of the radio installed in the
unit – 0.5 or 1.0 W. The Serial Number is the identifier for the radio and is used by
the protocol when the “Auto Radio Address” parameter is enabled. The CIS Data
(Card Information Structure) is manufacturer information describing the PC Card
installed in the 8525 G2/8530 G2. DSP x.x / FPGA 0xNN indicates the firmware
revision of the radio’s DSP (x.x) and FPGA (0xNN) where x.x and NN represent
actual revision numbers.