Filter
Top Products
Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual 147
Chapter 5: Configuration
Scanner Properties Setup
Convert to UPC-A
Setting this parameter to on results in a non-standard decoding that returns 12 digits
from the 6 digit UPC E bar code.
Include Number Sys
If this parameter is enabled (set to on), the number system digit is included with the
decoded bar code data.
Include Check
When enabled (set to on), the check digit is included with the decoded bar code data.
Addendum
Important: Before “Addendum” can take effect, the “Short Code” parameter
in the Options menu (see page 139) must be enabled (set to ‘ON’).
Refer to “Addendum” on page 144.
Prefix/Suffix Chars
See “Prefix/Suffix Chars” on page 144.
5.5.13.11 Codabar
Enabled
Set this parameter to on to enable Codabar or off to disable it.
Strip Start/Stop Chars
Codabar uses the characters A, B, C, and D as start and stop characters. The first and
last digits of a Codabar message must be A, B, C, or D, and the body of the message
should not contain these characters. Setting this parameter to on strips the start and
stop characters from this bar code.
Field Size/Chars
Refer to the description beginning on page 141 for details.