Filter
Top Products
Chapter 6: Peripheral Devices & Accessories
Keyboard RAM Mount
178 Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual
6.3.4.2 Keyboard RAM Mount
You can install two vesa plates or one each of a vesa plate and a RAM ball end to the
RAM mount.
With the keyboard RAM ball end or vesa plate(s) installed on the RAM mount:
• Attach the RAM mount to a standard cradle (PN 1008442) using the hard-
ware included with your kit.
• Attach the other end of the mount to almost any surface. The ball
design allows both ends of the RAM mount to be angled to suit the
operator's needs.
6.3.5 Wiring Guidelines
Before installing the cables between the computer and other devices, consider
the following:
• Ensure the vehicle body and underlying wiring is not damaged while drill-
ing mounting holes.
• Protect cable runs from pinching, overheating and physical damage.
• Use grommets to protect cables that pass through metal.
• Use plastic straps and tie-downs to secure cables and connectors in their
desired location, away from areas where they may get snagged or pulled.
• Keep the cables away from heat sources, grease, battery acid, and other
potential hazards.
RAM Mount Kit PN 1008447
RAM Ball End
PN 9001804
Vesa Plate
PN 9001934
4 inch RAM Mount
PN 9001932