Filter
Top Products
Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual 109
Chapter 5: Configuration
Narrow Band Radio Setup
Table 5.2 Low Level Statistics Descriptions
Default All Parameters
• Tap on the Default all Parameters button to return all registry parameters
to default values.
When this button is pressed, a screen appears asking if you’re sure you want to
return all parameters to their default values.
• Tap on Ye s to return values to their default settings.
Note: This button does not default the radio parameters set under the Radio tab.
5.5.8.2 Channel Tab
Channel Number
This parameter determines the operating radio channel of the 8525 G2/8530 G2.
The allowable range for this parameter is
1 to 20. The default value is 1.
Note: The Channel Number dropdown menu displays only the channels that
have been enabled in the Channel Enable List.
TxMD Maximum "Tx D" value
Rx X
Number of extra characters received for last received message (due to delay
in host reporting back actual body size)
RxMx Maximum "Rx X" value
MChg Number of completed mode changes