Filter
Top Products
Chapter 2: Basic Checkout
Setting Up Marvell-88W8300 802.11g Radios
20 Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual
will need to manually enter a password (Master Key) in the Access Point or
Wireless Router and enter the same password in each client device that
accesses the wireless network. The manually configured WPA password
(Master Key) automatically starts the TKIP data encryption process.
Network Key:
This text box is used to specify a 5 or 13 ASCII character sequence or an
equivalent 10 or 26 Hexadecimal digit sequence that matches the active
WEP key on the access point.
• To assign a Network key, tap in the checkbox next to ‘The key is pro-
vided automatically’ to remove the check mark next to this option.
Figure 2.6 Accessing Network Key And Key Index
Key Index:
This field is used to identify the WEP key.
• Enter a value from 1 to 4.
Enable 802.1x authentication
“802.1X” is the IEEE standard that offers additional security for local area
networks. It provides authentication for user devices attached to an Ethernet
network, whether wired or wireless. A security protocol packet such as TLS
or MD5 encapsulated in an “EAP” is used in conjunction with the “802.1x”
standard to authenticate users at the MAC layer. Available EAPs are listed
in the dropdown menu next to the ‘EAP’ option.
• To activate “802.1X”, tap on the checkbox next to ‘Enable 802.1x
authentication’, and press the [SPACE] key to enable it.
Tap in this checkbox to
remove
Network Key & Key Index fields.
the checkmark. This disables this
option, providing access to the