Filter
Top Products
Psion Teklogix 8525 G2/8530 G2 Vehicle-Mount Computer User Manual 123
Chapter 5: Configuration
Bluetooth Setup
The Outgoing list dialog box displays a list of services marked as ‘Outgoing’. The *
column indicates the currently selected service. You can tap on Unselect to reset the
current selection, or you can tap on Select to make a selection. The Remove button
deletes the service from the outgoing list.
The Prompt menu determines the behaviour of the pop-up Selection menu.
Choosing Everytime causes the Selection menu to be displayed each time an
outgoing port is created. If you choose Once, the menu is displayed only when a
partner service is not selected.
To display the Selection menu at any time:
• Press [CTRL] [ALT] [F1], and switch the partner Bluetooth device.
If a connection to a partner device already exists, the connection is dropped and
another connection to the newly selected device is created instantly without
disrupting the application that has opened the outgoing port.
Note: To add a service to the Outgoing port, an active service must first be
deactivated. Then you can choose the ‘Outgoing’ option from the Activa-
tion menu (highlight a service, right-click or press the [SPACE] bar to
display the Activation menu).
5.5.9.4 Active Conn. Tab
The Active Conn. tab lists the Name, Address, and Type of the currently active
connections. The table is periodically updated while on display, but it can take a few
seconds before it reflects the actual list of connections. The Type column of the table
shows ‘ACL’ or ‘SCO’. The Connection list table shows the connections for
scanning as well as the service connections.
Note: You can change the device-name and description of your radio by clicking
on the System icon in Control Panel, which will open the System Proper-