Filter
Top Products
Structure options
You adjust the StructureMap settings from the Structure options
menu. The menu is available when Structure overlay is enabled.
Not all options are available when saved StructureMap files are used
as the source. Unavailable options are greyed.
Range Sets the search range.
Transparency Sets the opaqueness of the Structure overlay.
With minimum transparency settings, the chart
details are almost hidden by the StructureMap
overlay.
Palette Selects Structure palette
Contrast Determines the brightness ratio between light
and dark areas of the screen.
Water column Shows/hides the water column in Live mode.
If turned OFF schools of bait fish might not be
seen on the SideScan image.
If turned ON the accuracy of the SideScan image
on the map might be affected by the water
depth.
Frequency Sets the transducer frequency used by the unit.
800 kHz offers the best resolution, while 455 kHz
has greater depth and range coverage.
Clear live
history
Clears existing live history data from the screen
and begins showing only the most current data.
Log Sonar data Records StructureScan data.
Source Selects StructureMap source.
90
StructureMap | HDS Gen3 Operator Manual