Filter
Top Products
Trails
Opens the Trails dialog where trails settings can be adjusted and
trails can be converted into routes for navigation. Refer to "Converting
Trails to Routes" on page 53.
Logging type
You can select to record trail points based on time, distance, or by
letting the unit position a point automatically when a course
change is registered.
Specify one of the following logging types in the Navigating
Settings dialog:
• Auto - the unit positions a point automatically when a course
change is registered.
• Distance - select the Distance field and enter the distance you
want to record.
• Time - select the Time field and enter the time you want to
record.
Phantom Loran
Enables use of Phantom Loran positioning system.
Loran settings
Defines Loran chains (GRI) and preferred station for waypoint entry,
cursor position and position panel.
The graphic example shows a cursor position window with Loran
position information.
For more information refer to your Loran system documentation.
62
Navigating | HDS Gen3 Operator Manual