Filter
Top Products
SpotlightScan
To use the SpotlightScan feature, the SpotlightScan transducer
must be mounted on your trolling motor and its trolling motor
position sensor mounted on the trolling motor foot pedal. The
SpotlightScan feature can show structure and fish targets ahead
and around the boat without disturbing these areas before you
have a chance to fish them. Its trolling motor position sensor
ensures that the SpotlightScan returns match up correctly with the
orientation of your trolling motor. For installation instructions, refer
to the SpotlightScan Installation Manual.
The SpotlightScan transducer can be used for SpotlightScan
imaging, Downscan imaging, or as a conventional broadband/
CHIRP transducer.
The SpotlightScan transducer works with most MotorGuide and
Minn Kota cable steer trolling motors. Its scanning speed is
controlled by how fast the trolling motor is rotated with the foot
pedal.
The SpotlightScan image
9
SpotlightScan | HDS Gen3 Operator Manual
81