Filter
Top Products
Converting Trails to Routes
You can convert a trail to a route from the Edit Trail dialog. The
dialog is activated by activating the trail, then selecting the trail's
pop-up, or the Trail menu option.
The Edit Trails dialog can also be accessed by selecting the Trails
tool on the Home page.
Autorouting and Easy Routing
The Autorouting and Easy Routing suggest new routepoint
positions based on information in the map and on your boat's size.
Before you can start using this feature the boat draught, width and
height must be entered into the system. The boat settings dialog is
automatically displayed if the information is missing when you start
the feature.
Ú
Note: HDS Gen3 units designed for sale in the U.S. region
do not have Autorouting or Easy Routing capabilities.
Autorouting or Easy Routing features are disabled on all
non-U.S. units when they are used in U.S. territorial waters.
Ú
Note: It is not possible to start the Autorouting or Easy
Routing if one of the selected routepoints is located in an
unsafe area. A warning dialog is displayed, and you have to
move the relevant routepoint(s) to a safe area to proceed.
Ú
Note: If no compatible cartography is available, the
Autorouting or Easy Routing menu option is not available.
Compatible cartography includes Jeppesen CMAP MAX-N
+, Navionics+ and Navionics Platinum. For a full selection of
available charts please visit insightstore.navico.com, c-
map.jeppesen.com or navionics.com.
Waypoints, Routes, and Trails | HDS Gen3 Operator Manual
53