Filter
Top Products
Standby mode
In Standby mode, the Sonar and the backlight for screen and keys
are turned off to save power. The system continues to run in the
background.
You select Standby mode from the System Controls dialog.
Switch from Standby mode to normal operation by a short press on
the Power key.
Display illumination
Brightness
The display backlighting can be adjusted at any time from the
System Controls dialog. You can also cycle the preset backlight
levels by short presses on the Power key.
Night mode
The night mode option optimizes the color palette and backlight for
low light conditions.
Ú
Note: Details on the chart may be less visible when the
Night mode is selected!
Locking the touchscreen
You can temporarily lock a touchscreen to prevent accidental
operation of the system. Lock the touchscreen when large amounts
of water are on the screen, for example, in heavy seas and weather.
This feature is also useful when cleaning the screen while the unit is
turned on.
When the touch lock is active you can only operate the unit from
the keys.
Ú
Note: To prevent false touchscreen activation the
touchscreen will automatically lock when it detects a
significant amount of water on the screen.
You lock the touchscreen from the System Controls dialog.
You remove the lock function by a short press on the Power key.
24
Basic operation | HDS Gen3 Operator Manual