Filter
Top Products
Selecting pages and panels
Selecting a page
• Select a full page panel by selecting the relevant application
button on the Home page
• Select a favorite page by selecting the relevant favorite button
• Select a predefined split panel by pressing and holding the
relevant application icon
Select active panel
In a multiple panel page, only one panel can be active at a time. The
active panel is outlined with a border.
You can only access the page menu of an active panel.
You activate a panel by:
• Touch operation: tapping the panel
• Key operation: pressing the Panel key
Using the cursor on the panel
The cursor can be used to measure a distance, to mark a position,
and to select items.
Position the cursor by tapping the desired location on the screen or
by using the Cursor keys to move the cursor.
By default, the cursor is not shown on the panel.
When the cursor is active, the cursor position window is displayed.
To remove the cursor and cursor elements from the panel, press the
X key or select the Clear cursor option.
GoTo cursor
You can navigate to a selected position on the image by positioning
the cursor on the panel, then using the Goto Cursor option in the
menu.
The Cursor assist function
The cursor assist function allows for fine tuning and precision
placement of the cursor without covering details with your finger.
Press and hold your finger on the screen to switch the cursor
symbol to a selection circle, appearing above your finger.
26
Basic operation | HDS Gen3 Operator Manual