Filter
Top Products
Integration of 3
rd
party devices
A device connected to the NMEA 2000 network should
automatically be identified by the system. If not, enable the feature
from the advanced option in the System settings dialog.
The 3
rd
party device is operated by using menus and dialogs as on
other panels.
This manual does not include specific operation instructions for any
3
rd
party device. For features and functionality, refer to the
documentation included with the 3
rd
party device.
Mercury VesselView integration
Mercury VesselView 7 SmartCraft data display and interaction are
enabled through the HDS Gen3 when a VesselView 7 or VesselView
4 gateway device is present on the NMEA 2000 network.
A Mercury icon appears in the Tools menu when the device is
available.
FUSION-Link integration
The FUSION-Link devices appear as additional sources when using
the audio function. No additional icons are available.
Refer to "Audio" on page 126 for more information.
BEP CZone integration
The HDS Gen3 integrates with BEP’s CZone system used for
controlling and monitoring a distributed power system on your
vessel.
The CZone icon is available in the Tools panel on the Home page
when a CZone system is available on the network.
A separate manual is provided with your CZone system. Refer to this
documentation and to the HDS Gen3 Installation manual for how to
install and configure the CZone system.
CZone dashboard
When the CZone is installed and configured, an additional CZone
dashboard is added to the Info panels.
Introduction | HDS Gen3 Operator Manual
21