Filter
Top Products
Vessel alarms
You can define several alarms to alert you if a target shows up
within predefined range limits, or if a previously identified target is
lost.
Alarm ID Description
Dangerous
vessel
Controls whether an alarm will be activated
when a vessel comes within the predefined CPA
or TCPA. Refer to "Defining dangerous vessels" on page
125.
AIS vessel lost Sets the range for lost vessels. If a vessel is lost
within the set range, an alarm occurs.
Ú
Note: The check box controls whether the
alarm pop-up box is displayed and if the
siren goes on. The CPA and TCPA define
when a vessel is dangerous regardless of the
enabled/disabled state.
Vessel
message
Controls whether an alarm will be activated
when a message is received from an AIS target
AIS | HDS Gen3 Operator Manual
123