Filter
Top Products
Square turn
Makes the vessel automatically turn 90° after having travelled a
defined leg distance.
Lazy S-turn
Makes the vessel yaw around the main heading.
Recording and converting a trail to a route
The Record trail button is used to record and convert a trail or part
of a trail to a route.
1. Select Record trail at the desired location to start recording a
new trail.
2. Select Save route to select the end location of the route. The
Edit trail dialog appears.
3. Select Create route. The Edit route dialog appears.
4. Enter the route details and save it.
Navigation mode
In Nav. mode you can use the autopilot to steer the boat to cursor
position, to a waypoint position, or along a pre-defined route. The
position information from the GPS is used to keep the boat on the
track line towards the destination point.
102
Autopilot | HDS Gen3 Operator Manual