Filter
Top Products
Introduction
Operating the system
You can use both the keys and the touchscreen to operate the HDS
Gen3.
This manual uses the following general terminology to describe
operating the unit.
Term Touch Key
Select Tap the panel Use the cursor keys to select, then
confirm by pressing the Enter key
Press
and
hold
Press and hold on
the screen
Use the cursor keys to select, then
press and hold the Enter key
Drag Drag an item to a
new position
Use the cursor keys to select an item,
confirm by pressing the Enter key.
Use the cursor keys to select a new
position, and then press the Enter
key again to confirm the new
position.
1
Introduction | HDS Gen3 Operator Manual
15