Filter
Top Products
Multiple alarms
If more than one alarm is activated simultaneously, then the alarm
message displays a list of up to 3 alarms. The alarms are listed in the
order they occur with the alarm activated first at the top. The
remaining alarms are available in the Alarms dialog.
Acknowledging a message
The following options are available in the alarm dialog for
acknowledging a message:
Option Result
Close Sets the alarm state to acknowledged, meaning that
you are aware of the alarm condition. The siren /
buzzer stops and the alarm dialog is removed.
However, the alarm remains active in the alarm
listing until the reason for the alarm has been
removed.
Disable Disables the current alarm setting. The alarm does
not show again unless you turn it back on in the
Alarms dialog.
There is no time-out on the alarm message or siren. They remain
until you acknowledge the alarm or until the reason for the alarm is
removed.
146
Alarms | HDS Gen3 Operator Manual