Filter
Top Products
Arrival mode Description
Standby Cancels autopilot activity and returns the vessel
to handheld remote or foot pedal control.
Heading lock Locks and maintains the last vessel heading.
Anchor Anchors the vessel at the current destination.
Ú
Note: We recommend only using heading lock in open
water.
Anchor point setup
Anchor points can be saved as a new waypoint, replaced with an
existing waypoint, or set as your current coordinates.
Anchor points are synced with the Xi5 trolling motor. If any anchor
points are stored in the motor, they appear in the anchor points list.
Autopilot | HDS Gen3 Operator Manual
105