Filter
Top Products
5iQue
®
3000 Operating Instructions
INTRODUCTION > STARTING YOUR HANDHELD AND CALIBRATING THE SCREEN
Starting Your Handheld and Calibrating the Screen
The first time you start the iQue handheld, setup instructions appear on the screen. These instructions include a calibration screen,
or digitizer. Calibration aligns the internal circuitry of the handheld with its touch-sensitive screen so your handheld can detect
stylus taps correctly. If you notice that the handheld does not respond properly when you tap the screen with the stylus, you may
need to calibrate the screen again.
To calibrate your screen:
1. Tap the Home icon
. Select All from the pick list in the upper-right corner. Then tap the Prefs icon .
2. In the pick list in the upper-right corner of the screen, tap Digitizer.
3. Follow the on-screen instructions.
Adjusting the Brightness of Your Screen
To adjust the backlight brightness:
1. Press the Power button to turn on the device.
2. Press and hold the Power button. Then release the button. (Or, tap .)
3. Tap and drag the brightness adjustment slider to the desired level. Then tap Done.
Brightness Adjustment Slider
NOTE: Backlight is the most significant factor in reducing or lengthening battery life. Turning the brightness up or
keeping the backlight on can reduce battery life significantly.