Filter
Top Products
81iQue
®
3000 Operating Instructions
EXPANSION CARD
CHAPTER 7: USING AN EXPANSION CARD
The iQue 3000 allows you to insert a microSD expansion card. You can insert and remove a card at any time without a reset. An
expansion card allows you to back up data, increase memory size, or add games, reference materials, or other additional software or
files to your handheld.
To insert a card in the iQue:
Insert the card down into the card slot (as shown in the illustration above) until it clicks into place. The iQue automatically displays the
contents of the card.
To remove a card from the iQue:
1. Make sure the iQue is not reading or writing data on the card.
2. Gently push the card down into the slot, then release it so the card pops partially out of the slot.
3. Pull the card out of the iQue.
Displaying Contents of a Card
When you insert an expansion card, your handheld creates a new Applications Launcher category and displays in the category
all applications listed in the card’s launcher directory. The new category for the expansion card is named after the expansion card
volume; for example, the name “Card” is used throughout this section.
To display the contents of your card:
1. Tap the Home icon
on the front of your iQue until the “Card” category is displayed,
OR
Tap the Applications category pick list in the upper-right corner of the screen, then tap Card. The expansion card contents are displayed
on the Applications menu.
2. To display any additional applications, tap the scroll bar.