Filter
Top Products
96
Info Field Description
Coordinates: Primary The primary coordinates format for the current GPS location, cursor position, or
map center in the primary format. The default is Lat/Lon. (Units > Coordinates:
Primary)
Coordinates: Secondary The secondary coordinates format for the current GPS location, cursor position,
or map center in the secondary format. The default is UTM/UPS. (Units >
Coordinates: Secondary)
Course The direction of travel on a route from the starting location to the destination
( nish or next stop); expressed in degrees. (Units > Bearing)
Device Odometer The total distance traveled in all trips. (Units > Measure)
Distance: Climbing Pro le Page only. The cumulative linear distance spent in increasing elevation.
(Units > Measure)
Distance: Descending Pro le Page only. The cumulative linear distance spent in decreasing elevation.
(Units > Measure)
Distance: Linear Pro le Page only. The cumulative linear distance from the start to the point of
reference, not taking into account distance caused by elevation changes.
(Units > Measure).
Distance: Terrain Pro le Page only. The cumulative distance along the ground, including any
distance increases caused by changes in elevation. (Units > Measure)
Distance to Finish The distance from the current location to the route nish. (Units > Measure)
Distance to Next Stop The distance from the current location to the next stop in the route. (Units >
Measure)
Info Fields Table