Filter
Top Products
7
Using the PN-60
bottom left corner of the screen ashes red. When
the device is fully charged, the light is green.
To improve battery life
Automatically turn off the backlight after 15 seconds;
go to Settings > Display > Backlight Timer >
15 sec.
Use the power saving option; go to Settings >
System > GPS Setting > Power Saving. For more
information, see To change system settings on
page 79.
Turn off the GPS receiver when inside. Go to Settings
> System > GPS Setting > Off
OR
from the Satellites Page, go to MENU > Turn Off GPS.
Use batteries with higher milliamp-hour (mAh) ratings,
such as Energizer
®
Ultimate Lithium.
Turning the PN-60 On or Off
The Power button is at the bottom right corner of the
button area.
To turn on the PN-60, press and hold Power until you
see the Welcome screen.
To turn off the PN-60, press Power and hold for
1.5 seconds until the “Shutting down the device”
message displays. Then, release the button.
To view or hide Demo Mode
The rst time you turn on the PN-60, it opens in Demo
Mode.
To view the demo, follow the on-screen instructions.
To exit the demo, press QUIT.
To turn off Demo Mode—from the rst screen, press
ENTER to clear the Show at Startup check box.
To restore Demo Mode, go to Settings > System >
GPS Setting > Demo Mode.
The Home Page
The Home Page uses icons to give you a quick and easy
way to locate the page on the device you want to view.
For more information, see The Home Page section
on page 16.
Rotating the Display
You can choose to allow the screen to rotate when you
turn the device upside down. Go to Settings > Display >
Allow Screen Rotation and select the check box. When
rotated, the arrow keypad adjusts to match the device’s
orientation.