Filter
Top Products
49
The Waypoints Page
Sorting the List
There are two ways to sort your list of waypoints—
by distance from your GPS location or alphabetically
by name. From the Waypoints Page, press MENU; the
device is set to the option that is not showing. To switch
to the highlighted option, press ENTER. If the le has
a large number of waypoints, press ENTER to interrupt
the sorting process and see a partial list.
Symbols
The waypoint symbols available on the PN-60 match
the PN-Series symbol set in your DeLorme mapping
application. The symbol set includes geocaching symbols
(these are at the end of the symbol list). To ensure
a waypoint displays on the Waypoints Page, use a
waypoint symbol. If you use a geocaching symbol, the
waypoint will display only on the Geocaches Page. To see
the geocaching symbols, go to page 54. For a complete list
of symbols, see the DeLorme Wiki (wiki.delorme.com).
File Menu
Use the File menu to manage waypoint GPX les stored
in the PN-60’s internal memory or on an SD card in the
device, as well as waypoints you create on the device.
For more information about les, see File Management
on page 85.
To open the File menu, from the Waypoints Page, go to
MENU > File. The following options are available:
New—Create a new GPX le and name it. When you
turn off the device, the le will be automatically saved.
Open—View a list of GPX les in internal memory
and on the SD card. The le location displays at the
bottom of the screen. Select the le you want to
open and press ENTER to view the waypoints on the
device.
Save As—Save the open le as a new le, name it,
and select the location for the le. If you have made
any changes to the open le, the changes are saved
in the new le—the original le does not retain the
changes.
Move to Internal/Move to SD Card—Move the
open le from the current stored location to the
alternate location. For example, you can open a le
from an SD card and move it to the device’s internal
memory.
Close – Close the open GPX le.
Marking a Waypoint
Use the Mark button on the PN-60 to mark a waypoint at
your current GPS location or at the map cursor if you are
viewing another location on the map. When the waypoint
is marked at the map cursor location, the elevation is not
available.