Filter
Top Products
8
Using the Buttons
Power
Use the Power button to turn the PN-60 on and off, lock
the buttons, or to change the backlight settings.
To turn on the device, press and hold the Power
button until the Welcome screen displays.
To turn off the device, press the Power button until
the “Shutting down the device” message displays.
To open the power options screen, quickly press and
release the Power button. The following options are
available:
» To change the backlight intensity, use the arrow
keypad to adjust the backlight slider.
» To lock the buttons, select Yes when you see the
Lock the buttons? message.
» To unlock the buttons, press Power. Then, select
Yes when you see the Unlock the Buttons?
message.
Tips
» Reduce the backlight intensity and decrease the timer to
signi cantly improve battery life.
» The TFT screen is readable in direct sunlight or slanting light
conditions.
» For more information about backlight intensity and the back
light timer, see the Settings > Display section on page 80.
In/Out
Use the IN/OUT button to zoom the map or a track pro le
in or out or scroll through a list.
Press IN once to zoom the map or a track pro le in
one level and show more detail.
Press and hold IN to zoom the map in all the way.
Press OUT once to zoom the map or a track pro le
out one level and show less detail.
Press and hold OUT to zoom the map out all the way.
Press IN or OUT to move forward or backward one
page at a time when viewing lists.
Page
Press the PAGE button to move forward through the
pages in the page order sequence. To add, remove, or
Using the PN-60