Filter
Top Products
57
message, select Yes. The geocache’s location information
will update to the current GPS location.
To delete a geocache
From the geocache details page, go to MENU > Delete
Geocache. When you see the con rmation message,
select Yes.
To delete geocaches by symbol
From the Geocaches Page, go to MENU >
Delete by Symbol.
1. On the Geocaches Symbol page, select the check box
for each symbol you want to delete. Only symbols
used in the current le are listed.
2. Select Delete. When you see the con rmation
message, select Yes.
The geocaches with that symbol in the current le
are deleted from the le.
Averaging a Geocache
When you average a geocache, the PN-60 records a
series of GPS readings for the geocache’s location and
averages them to increase the positional accuracy of the
geocache. As you average the geocache, the GPS status,
coordinates, elevation, number of readings at the location,
and estimated accuracy display. Multiple readings improve
the positional accuracy of the geocache. The estimated
accuracy number decreases as the accuracy improves.
To average a geocache
From the geocache details page, go to MENU > Average
Geocache. When the device has recorded the number
of readings you want, press ENTER.
Tip Average your location during multiple visits, at different
times of the day to get the best results. Always place the
device in the same location to average the geocache.
Projecting a Geocache
You can project a geocache at a new location by providing
the bearing and distance from an existing geocache.
To project a geocache
1. From the geocache details page, go to MENU >
Project Geocache.
2. Enter the information for projected geocache in the
Bearing and Distance elds.
3. Select Move to move the existing geocache or
Create New to mark a new geocache at the projected
location. Then, press ENTER.
The Geocaches Page