Dell X3i GPS Receiver User Manual


 
www.dell.com | support.dell.com
8 Owner’s Manual
To help avoid the potential hazard of electric shock, do not connect or
disconnect any cables or perform maintenance or reconfiguration of
this product during an electrical storm. Do not use your device during
an electrical storm unless all cables have been disconnected and the
device is operating on battery power.
Before you clean your device, disconnect the device from the electrical
outlet. Clean your device with a soft cloth dampened with water. Do
not use liquid or aerosol cleaners, which may contain flammable
substances.
Do not expose the GPS receiver to temperatures above 60 degree
Centigrade (128 degrees Fahrenheit). Failure to follow those
instructions may present risk of explosion, fire or high temperature. In
particular do not leave your GPS receiver exposed to direct sunlight in
your vehicle for extended time periods when you are not using your
navigation system.
Power
Use only the Dell-provided DC charger or the standard Dell AC
adapter provided with your Dell™ Axim™ PDA approved for use with
this device. Use of another AC adapter or DC charger may cause a fire
or explosion.
Before you connect the device to an electrical outlet, check the DC
charger or AC adapter voltage rating to ensure that the required
voltage and frequency match the available power source.
To remove the device from all power sources, turn the device off, and
disconnect the DC charger and/or the AC adapter from the electrical
outlet.
To help prevent electric shock, plug the AC adapter and device power
cables into properly grounded power sources. These power cables may
be equipped with 3-prong plugs to provide an earth grounding
connection. Do not use adapter plugs or remove the grounding prong
from the power cable plug. If you use a power extension cable, use the
appropriate type, 2prong or 3-prong, to mate with the AC adapter
power cable.