Dell X3i GPS Receiver User Manual


 
Owner’s Manual 23
7
Re-shape the arm so that a portion of it is resting on the dashboard for
support.
Using the Car Charger
General precautions
For most vehicles, the engine must be running to get power to the
cigarette lighter.
Do not expose the car charger to excessive heat, moisture, or gasoline.
Do not disassemble the unit or attempt to replace internal parts.
Do not allow children to operate or play with the cord.
Unplug the charger after use.
The vehicle’s power source must be within 10 to 30 V DC to function
properly. A built-in fuse with a rating of 1.5A offers protection to the
device being charged. Do not replace fuse with anything other than a
1.5A fuse.
To install the dashboard mount:
1
Start the vehicle’s engine before inserting the 12V DC Car Charger
into the cigarette lighter socket. A small LED will light to indicate that
power is active.
2
To charge the PDA only: Insert the power plug into your PDA for
charging.
3
To charge the GPS only: Insert the power plug into your GPS receiver
for charging.
4
To charge both the PDA and GPS: Insert the GPS Charger Cable with
the Y-connector supplied into your PDA. Then insert the opposite end
into your GPS receiver.
The 12V DC charger can now be inserted into the Y-connector for
charging of both devices.