Filter
Top Products
Owner’s Manual 19
storage card, the Existing map message appears, giving you the
opportunity to overwrite the existing map data. To overwrite the existing
map data, click OK.
7
Click Generate Map. The Generating Map progress screen appears. If
the correct CD is not available or another CD is needed, you will be
prompted to insert the CD.
8
When the map data has been successfully loaded onto the Pocket PC,
a message appears. Click the
OK
button.
9
To exit the Map Loader application, from the
File
menu choose
Exit
.
Starting the Application on the Pocket PC
Once you have loaded the map to your Pocket PC you are ready to start the
application.
To start the Navigation System:
1
Turn on the GPS receiver and place it where it can receive signals. A
blinking green light on the GPS receiver indicates that you have a GPS
fix (strong GPS signal).
NOTE: It may take up to 15 minutes to acquire a satellite fix.
2
Tap the
Start
menu and then tap
Programs
. The Programs screen
appears.
NOTE: Once you have used the Navigation System on your Pocket PC the
Navigation System icon will appear in the recently used programs. You
can tap the icon to start the Navigation System.
3
Tap the Navigation System icon on the Programs screen. A safety
warning screen appears.
NOTE: Important: You should not operate your Pocket PC while driving a
moving vehicle.