Filter
Top Products
7-15
FUEL INJECTION SYSTEM
D61
Malfunction histo-
ry code display.
Display
Displays the fault code num-
bers that are stored in the
malfunction history.
If code numbers more than
one are detected, the dis-
play alternates every two
seconds to show all the de-
tected code numbers.
When all code numbers are
shown, the display repeats
the same process.
00: No history
12–50: History exists
• Refer to the fault code
number.
D62
Malfunction histo-
ry code erasure
Actuation
and dis-
play
Displays the total number of
malfunctions, including the
current malfunction, that
have occurred since the his-
tory was last erased.
In addition, deletes the fault
code numbers from the his-
tory if the corresponding
items are currently operat-
ing normally.
00: No history
1–15: History exists
When this diagnostic code
number is selected, fault
code numbers for previously
detected malfunctions are
deleted from the history if the
corresponding items are cur-
rently operating normally.
D64
Setting history
display
Display
Displays whether or not his-
tory exists for settings that
were made using the Power
Tuner.
00: There is no setting histo-
ry.
01: There is setting history.
02: Whether or not setting
history data exists cannot be
determined (damage to his-
tory data).
D65
Setting map era-
sure
Display
Erases the settings that
were made using the Power
Tuner.
00: There are no settings
that were made using the
Power Tuner.
01: There are settings that
were made using the Power
Tuner.
D70
Program version
number
Display
Check the version number
of the program.
0–254
Diag-
nostic
code
No.
Item
Actuation
or display
Checking method
Actuation or LCD standard
display values