Filter
Top Products
5-50
SWINGARM
2. Install:
• Bearing "1"
•Washer "2"
•Oil seal "3"
To relay arm.
• Apply the molybdenum disulfide grease on
the bearing when installing.
• Install the bearing by pressing it on the side
having the manufacture's marks or numbers.
• Apply the molybdenum disulfide grease on
the washer.
3. Install:
•Bearing "1"
•Oil seal "2"
To connecting rod.
• Apply the molybdenum disulfide grease on
the bearing when installing.
• Install the bearing by pressing it on the side
having the manufacture's marks or numbers.
Installed depth of bearings "a":
Zero mm (Zero in)
Installed depth of bearings "a":
Zero mm (Zero in)