Filter
Top Products
4-82
TRANSMISSION, SHIFT CAM AND SHIFT FORK
3. Install:
•Washer "1"
• Circlip "2"
• Be sure the circlip sharp-edged corner "a" is
positioned opposite side to the washer and
gear "b".
• Install the circlip with its ends "c" settled even-
ly on the spline crests.
4. Install:
• Collar "1"
• Apply the lithium soap base grease on the oil
seal lip.
• When installing the collar into the crankcase,
pay careful attention to the crankcase oil seal
lip.
5. Install:
• Shift fork 1 (L) "1"
• Shift fork 2 (C) "2"
• Shift fork 3 (R) "3"
• Shift cam "4"
To main axle and drive axle.
• Apply the molybdenum disulfide oil on the
shift fork grooves.
• Apply engine oil to the shift cam groove, bear-
ing contact surface and shift fork shaft.
• Mesh the shift fork #1 (L) with the 4th wheel
gear "5" and #3 (R) with the 5th wheel gear "7"
on the drive axle.
• Mesh the shift fork #2 (C) with the 3rd pinion
gear "6" on the main axle.