Filter
Top Products
1-10
HANDLING THE ELECTRONIC PARTS
HANDLING THE ELECTRONIC
PARTS
Electronic parts are very sensitive. Handle
with care and do not give impact.
• Mankind has static electricity. It`s voltage
is very high and electronic parts are very
sensitive.
• It is possible that inner small components
of electronic parts are destroyed by static
electricity.
• Do not touch and do not make them dirty.
CHECKING OF CONNECTION
Check the leads, couplers, and connectors for
stains, rust, moisture, etc.
1. Disconnect:
• Lead
• Coupler
• Connector
2. Check:
• Lead
• Coupler
• Connector
Moisture → Dry with an air blower.
Rust/stains → Connect and disconnect sev-
eral times.
3. Check:
• All connections
Loose connection → Connect properly.
If the pin "1" on the terminal is flattened, bend it
up.
If the contact seems not good, pull the terminal
by hand and check its condition.
4. Connect:
• Lead
• Coupler
• Connector
Make sure all connections are tight.