Filter
Top Products
6-9
THROTTLE BODY
INSTALLING THE THROTTLE BODY
1. Install:
• Throttle body joint "1"
• Throttle body "2"
• Face the slot "a" in the throttle body joint to-
ward the bottom of the vehicle.
• Align the slot “a” on the throttle body joint with
the projection “b” on the throttle body.
2. Install the water-resistant cover "1" onto the
throttle body.
CHECKING AND REPLACING THE
PROTECTOR
1. Check:
• Protector "1"
Wear/damage → Replace.
Affix the protector as shown.
Throttle body joint clamp screw
3 Nm (0.3 m•kg, 2.2 ft•lb)