Filter
Top Products
5-6
FRONT WHEEL AND REAR WHEEL
3. Install:
• Collar "1"
• Apply the lithium soap base grease on the oil
seal lip.
• Install the collars with their projections "a" fac-
ing the wheel.
4. Install:
• Wheel
Install the brake disc "1" between the brake
pads "2" correctly.
5. Install:
• Wheel axle "1"
Apply the lithium soap base grease on the
wheel axle.
6. Install:
• Nut (wheel axle) "1"
7. Tighten:
• Bolt (axle holder) "1"
Before tightening the bolt, fit the wheel axle to
the axle holder by stroking the front fork several
times with the front brake applied.
Nut (wheel axle):
105 Nm (10.5 m•kg, 75 ft•lb)
Bolt (axle holder):
21 Nm (2.1 m•kg, 15 ft•lb)