Filter
Top Products
4-59
KICK SHAFT AND SHIFT SHAFT
INSTALLING THE SHIFT GUIDE AND SHIFT
LEVER ASSEMBLY
1. Install:
• Spring "1"
• Pawl pin "2"
•Pawl "3"
To shift lever "4".
Apply the engine oil on the spring, pawl pin and
pawl.
2. Install:
• Shift lever assembly "1"
To shift guide "2".
3. Install:
• Shift lever assembly "1"
• Shift guide "2"
• The shift lever assembly is installed at the
same time as the shift guide.
• Apply the engine oil on the bolt (segment)
shaft.
4. Install:
• Bolt (shift guide) "1"
INSTALLING THE SHIFT SHAFT
1. Install:
• Roller "1"
• Collar "2"
• Torsion spring "3"
•Washer "4"
• Shift shaft "5"
Apply the engine oil on the roller and shift shaft.
2. Install:
• Shift pedal "1"
• Bolt (shift pedal) "2"
Align the punch mark "a" on the shift shaft with
the notch "b" in the shift pedal.
Bolt (shift guide):
10 Nm (1.0 m•kg, 7.2 ft•lb)
Bolt (shift pedal):
12 Nm (1.2 m•kg, 8.7 ft•lb)