Filter
Top Products
1-6
INCLUDED PARTS
INCLUDED PARTS
DETACHABLE SIDESTAND
This sidestand "1" is used to support only the
machine when standing or transporting it.
• Never apply additional force to the side-
stand.
• Remove this sidestand before starting out.
VALVE JOINT
This valve joint "1" prevents fuel from flowing
out and is installed to the fuel tank breather
hose.
In this installation, make sure the arrow fac-
es the fuel tank and also downward.
SPARK PLUG WRENCH
This spark plug wrench "1" is used to remove
and install the spark plug.
NIPPLE WRENCH
This nipple wrench "1" is used to tighten the
spoke.
HANDLEBAR PROTECTOR
Install the handlebar protector "1" so that the
mark "a" face forward.
FUEL TANK HOLDING CABLE
The fuel tank holding cable "1" is used to sup-
port the fuel tank during maintenance.