Filter
Top Products
- 69 -
NOTE :
If you are not totally against
u-turns, leave them on, and add a
certain penalty (equivalent extra
distance to travel) in Advanced
setting Route options (7.6.4).
Via points are handled as
stopovers with regards to u-turns.
It means disabling u-turns on this
page will avoid u-turns during the
entire route if possible, but when
reaching a via point, the following
part of the route may be planned
starting in the opposite direction.
7.4.4.4 U-turns
Although displayed amongst
road types, this is a type of
action. Most drivers prefer to
replace them with a few normal
left and/or right turns in the next
few junctions, so it is disabled
by default.
Turning back on dual roadways
is not considered a u-turn.
7.4.4.5 Permit Needed
To use some roads or enter
some areas you may need a
special permit or permission
from the owners. These roads
are excluded from your routes
by default. Use this switch if
your vehicle is authorized to
enter.
7.4.4.6 Toll Roads
Toll roads are included in your
routes by default. If you wish
to travel more to avoid paying
a toll, disabling them will make
this Navigator plan the best toll
free route for you.
NOTE :
You have a few more ways
to inuence routing and route
recalculation in Advanced
Settings Route Options (7.6.4).