Venturer HPS9308 GPS Receiver User Manual


 
- 19 -
NOTE:
The automatic day/night mode
is based upon the current date
and GPS position by which this
Navigator calculates the exact
sunrise and sunset times on the
particular day at the particular
location. Using that information
this Navigator can automatically
switch between the color schemes
a few minutes before sunrise,
when the sky has already turned
bright, and a few minutes after
sunset before it gets dark.
6.3.3 Day and Night Color
Schemes
The different color schemes let
you adjust this Navigator to the
brightness of the environment.
Use the day and night color
schemes according. Daylight
colors are similar to paper
roadmaps, while the night color
schemes use dark tints for large
objects to keep the average
brightness of the screen low,
with carefully selected colors to
still keep you informed about all
the necessary information on
the screen.
TIP :
There are several day and night
color schemes included with this
Navigator. To select the one that
suits your needs the best, make
your selection in Settings (7.2.1).
To further enhance the effect of
the night color scheme, you can
instruct this Navigator to decrease
the display backlight when the
night colors are used. Set the
desired backlight levels for both
day and night modes (7.6.2).
You can change between day
and night views manually in the
Quick Menu (6.7.2.3) or let this
Navigator do it automatically
(7.1.3) for you.
NOTE:
The colors mentioned and
screenshots included in this
manual refer to the default day
and night color schemes. They
may not look the same in the
schemes you have chosen.