Filter
Top Products
94 A60 Dual Function Display
Erasing a Route or Track
You can delete any route or track in your system except for the one that you are
traveling to.
1. Select the appropriate route or track.
2. Press ERASE ROUTE or ERASE TRACK.
A warning box is displayed asking you whether you want to proceed.
3. If you choose to proceed, the route or track is erased.
When you erase a route the system deletes only those waypoints created with this
particular route, that is, dropped using the cursor when making a new route.
Waypoints that have been created separately, are used in other routes, or have
been modified using the EDIT WAYPOINT menu (symbol, name, lat/lon, comment)
are not deleted.
Note:
If you attempt to edit an active route, the ERASE ROUTE soft key is grayed out.
4.10 Monitoring Where You Are Going
... using Chart Vectors
You can display graphical indicators to help monitor where you are going.
Heading (HDG) and Course Over Ground (COG) Vectors
Heading (HDG) is displayed as a red line with an open arrowhead. It does not take
account of winds or tides. Course Over Ground (COG) indicates the boat’s actual
course and is displayed as an amber line with two arrowheads. HDG and COG
vectors correspond to the centerline displayed in the Digital Compass (page 40).
D9868-1
ROUTES.
..
REV & EDIT
ROUTES...
ERASE
ROUTE
D9869-1
REV & EDIT
TRACKS...
ERASE
TRACK
TRACKS.
..
81295.book Page 94 Wednesday, December 20, 2006 2:48 PM