Filter
Top Products
Chapter 4: Using the Chartplotter 81
5. To save the built route for later use (and rename it if desired):
Press SAVE ROUTE.
To save and immediately follow the built route:
Press FOLLOW QUICK RTE.
Following a Route
There are three different ways that you can follow a route:
• Using Quick Route
—or—
• Using the Cursor
—or—
• Via the Route List
In addition to these basic options you can also follow a route in reverse order or
advance to the next waypoint in a route that you are currently following.
Note:
If you power off the A60 using the PWR key while following a route, you will auto-
matically continue to follow the route when you power the unit on again.
NORTH POINT
KNOLL
COWES
6.0nm North-Up (Relative Motion)
Csr Pos N 50°48.000 W 001°20.000
232°T
2.7nm
D9849-1
RESTART
XTE
...
RESTART
XTE
...
STOP
FOLLOW
ADVANCE
WAYPOINT
ADVANCE
WAYPOINT
STOP
FOLLOW
81295.book Page 81 Wednesday, December 20, 2006 2:48 PM